INSTALLATION
Our product is ready to be installed and specially protected by foil against adverse environment. Nevertheless, it must be protected from moisture, extreme temperatures and direct sunlight. Prior to installation, carefully check the supplied material and any damage or irregularities to report to the seller. Laying the floor of the loaded material defects will not recognize warranty claims. Defective material is to be replaced. Then, check the surface on which you installed the floor. The surface should be firm, flat, smooth and free from cracks should have adequate moisture to allow stacking wood (max CM-2% for substrates). When installing expansion joints should be at the walls, doors and joints of the tiles or terracotta. For the installation of the floor, use the appropriate chemicals floor (preferably a proven system from a single vendor including primer, used to prepare the ground, glue suit the type of wood and the size of the material) - laying floor recommends performing chemistry that is used and is responsible for its quality. It must be remembered that the surface finish may highlight the structure and nature of the selected timber, or the characteristics of tone. At the same time as a specific material, such as wood makes it virtually impossible to obtain the same effect as viewed samples. Each wooden floor has a unique style and character. Parquet can start work performed after the completion of all the finishing work such as those related to the laying of tiles, installation of heaters, including pressure tests, and even painting. Therefore floorboard purchased immediately prior to installation should be stored in a dry, warm, well-ventilated, protected from the elements, isolated from the substrate. In areas where the work is performed Parquet temperature should not be less than 15%, while relative humidity range 45-65%.
Solid oak flooring
Preferred mounting boards, as flooring adhesive, however, it may serve as a floating floor. One major advantage is that the board and in the poses do not require sanding.
Note, however, that the maintenance and care is an essential part of maintaining the properties, charm and beauty of hardwood flooring.
USE
Wood flooring is a natural product and hygroscopic changing their properties with changing conditions in the environment. The best conditions for both wooden floors as well as for human prevail at room temperature is 18-20 ° C and relative humidity 45 - 60%. Higher humidity leads to swelling of the wood and may cause damage to the material, the lower layer consists of and the emergence of large and small joints. Wood work can be reduced by keeping the recommended conditions by using humidifiers in the winter, but it is not possible to be completely ruled out. Natural wood work and fit the material to the environment can not be the reason for the complaint. The floor and used for the oil or varnish are based on normal wear and usage. The conditions of heat and humidity should also be provided after the floor until the cast housing (building) to use. The aim should be to ensure that such conditions prevailed throughout the life of the floor. In winter we often have to deal with low humidity (which can be up to ten per cent). In this case, without additional humidification floor will dry out creating gaps between the boards.
FLOOR CARE
Indications:
Floor board is protected by two or specially hardened coatings, lacquers prepared to put in the oil and or 6-king layers of UV-curable coatings. To keep it clean should be vacuumed, if necessary, wipe with a damp cloth. The floor should be protected from excessive dirt and scratches piling at the entrance of the wiper or protective mats. The legs of furniture and other heavy objects should be secured with felt or rubber washers. Furniture on wheels should be soft wheels (e.g. rubber, but not doing a trace), plants do not put on the floor without stand. Do not let that grain of sand caused the scratches. A new floor for the first 10 days should only be cleaned dry.
Washing: Use a damp cloth, using a mild cleanser (recommended by the manufacturer or any other commercially available dedicated to the care of wooden floors). Same water removed with a dry cloth.
Note, however, that the maintenance and care is an essential part of maintaining the properties, charm and beauty of hardwood flooring.
Other substances:
a) asphalt, oil, rubber, shoe, chocolate, fats, creams - Petrol solvent
b) lipstick, ink - alcohol diluted with water 1:1
c) stearin, chewing gum, wax - such as ice cubes to cool, then gently scrape
d) paint, glue hardened materials - remove immediately, then wash with gasoline.
For stubborn stains, wash the floor with a floor cleaning product recommended by the manufacturer's instructions for use - allow to dry thoroughly.
Maintenance of floors:
In order to maintain the floor in optimum condition (when necessary), depending on the intensity of use, use for the preservation of the oil, in the case of oil impregnated white area => white oil used in the remaining area and the dark area => used oil in natural colour.
For finished floors (and specially cured coatings, lacquers prepared to put in the oil) Maintenance measures should be applied lacquer coatings. Detailed information can be found on the packaging of all w / in resources.
The claim does not cover:
a) damage to the boards due to improper transport or storage,
b) damage caused by improper installation of the rules of the trade or by unskilled operators,
c) boards that have been repaired or modified in-house, without the consent or written agreement with the manufacturer,
d) damage caused by moisture (flooding) and mounting boards in prohibited places (saunas, bathrooms) and exposed through this to the adverse weather conditions and excess humidity 55-60%,
e) damages caused by the action of mechanical (impact, scratches, scratching furniture sliding, sharp edges, dents heel, wheel or anything hard, abrasion and tear and scratches caused by sand or other material bearing) as well as the normal wear of the surface which is the result of exploitation. The top layer of the visible signs of wear paint, and irrevocably destroyed decor may be subject to floor polished (depending on the thickness of the layer in use)
f) floor, which was installed despite having obvious defects (presence of visible defects must be noted before installing the floor)
g) damage due to installation on the ground floor of inadequate moisture. Optimum Moisture: 1% concrete, wood, 8%, 0.5% anhydrite
h) natural discoloration floor. The specific properties of wood make it change colour when exposed to sunlight over time. The intensity of these changes is different for different species. The final stabilization of the decor comes after a period up to six months.
i) Product damaged in the fire, natural disasters and other accidents,
j) excessive loading and operation of the floor due to the maximum standards,
k) tear on the floorboard at the edges (a natural process)
l) differences in colour, lustre and surface texture decor between products sold and pictures or samples and, in the case of supply contracts, variability in the production, including the differences in colour between different batches of products.
On the surface of the wood flooring is a thin protective layer that improves resistance to water penetration floor and its resistance.
Regardless of the type of wood and lacquer used any wood flooring requires regular cleaning and maintenance using the recommended chemistry of the floor.
Before taking the room is in operation, the surface must first be thoroughly clean and dry, and only later be used in accordance with the recommendations of-care-finished floors. You can carry out additional maintenance not dilute liquid when fully cured lacquer coating, which is usually at about 8-10 days after completion of painting.
It is important to freshly varnished floors do not use the first day, and the next week to clean the floor very carefully and only dry. The floor requires regular care, consisting of vacuuming and washing the floor with water and floor care centre.
Washing: Use a damp cloth, using a mild cleanser (recommended by the manufacturer or any other commercially available dedicated to the care of wooden floors). Same water removed with a dry cloth.
For accurate removal of the floor of grains of sand and small debris is best to use a vacuum cleaner with a special tip for cleaning floors, made of soft bristles. while
Daily cleaning and dry, you can use a mop with a soft tip designed to collect dust. Particular attention should be paid to the choice of tools used for the care and cleaning of wood floors wet. Some of them, such as a mop-bob is not suitable for this purpose, make a very large amount of water to wood. This may cause the liquid to fall into the gap between the staves, causing discoloration, progressive deformation of the side edges of strips of boards or other damage.
Preparations for wood floors:
To maintain a beautiful floor can be used readily available resources for the care of parquet and wooden floors.
Among the commonly available products for wooden floors should be clearly distinguished from the cleaning of skin care and nursing and cleaning. Cleaning products are intended solely for the removal of impurities, polishing pastes and other means of care imposed on the floor during use. Keep in mind that these antibiotics (especially High Performance) should not be used too often, because they contain alkaline agents can cause graying and crumbling layers of paint. Casual Wooden floors should be kept clean by regular sweeping and vacuuming.
Note, however, that the maintenance and care is an essential part of maintaining the properties, charm and beauty of hardwood flooring.
Note, however, that the maintenance and care is an essential part of maintaining the properties, charm and beauty of hardwood flooring.
Care products are used to protect the paint film and clean the floor. High-quality preparations based on waxes or polymers, so you do not need to be frequently used and very well protect the surface of wooden floors. For sale are also available formulations that combine nursing and cleaning agents, which greatly facilitate and accelerate the clean up work. Please note that the use of improper chemicals or conduct contrary to the instructions for their use can very quickly lead to a matt surface moisture entering the wood or wood graying. In extreme cases it can even lead to disruption of the coating from the surface of the wood and the need of partial or total replacement.
Note, however, that the maintenance and care is an essential part of maintaining the properties, charm and beauty of hardwood flooring.
COMPLAINT
In case of unjustified complaints, all costs associated with leaving the Service borne by the declarant.
Filing a complaint.
Note, however, that the maintenance and care is an essential part of maintaining the properties, charm and beauty of hardwood flooring.
Washing: Use a damp cloth, using a mild cleanser (recommended by the manufacturer or any other commercially available dedicated to the care of wooden floors). Same water removed with a dry cloth.
Claims must be submitted in writing within 30 days after the occurrence of the defect, and proof of purchase the advertised floor.
The complaint shall be notified to the point where the customer has purchased or directly to the manufacturer. The manufacturer is obliged to respond to the claims of the applicant within 14 working days from the date of filing the complaint.
The complaint does not exclude, limit or suspend the Buyer's rights under the non-conformity. In matters not covered by this warranty shall be governed by the Law of 27.07.2002r. the specific conditions of consumer sale (No 141, item 1176) and the provisions of the Civil Code.
Contact us. We are happy to answer any questions.
